Introduction Installation Quick Start Creating Stacks Editing/Arranging Stacks Study with Z-Flash Using PC FlashCard Transferring Stacks Manual Index

Online Software Manual Library

Transferring card stacks between your Zaurus & PC

Before you can transfer data, you must link your PC to your Zaurus with a PC cable or infrared adapter.

Transferring a stack to your Zaurus

1. Turn on your Zaurus and select the TOOLS application. Then select PC Link and choose either Infrared or Cable, depending on the type of link you have to your PC.

2. On your PC, click on the Zaurus menu and select Port Settings to specify which PC Comm port is connected to your Zaurus.

3. Open the stack by clicking on the File menu and selecting Drill.

4. Click on the Send toolbar button. The program will ask you to name the file before sending it.

Transferring a stack to your PC

1. Turn on your Zaurus and select the TOOLS application. Then select PC Link and choose either Infrared or Cable, depending on the type of link you have to your PC.

2. On your PC, click on the Zaurus menu and select Port Settings to specify which PC Comm port is connected to your Zaurus.

3. Click on the Receive toolbar button. At the top of the screen, you will see a menu of all the stacks in your Zaurus. Highlight the stack you wish to transfer.

4. Give the stack and 8-letter or less name in the File Name box. (Do not delete the .FCL suffix.) Click OK.

5. The stack will be transferred to your PC and opened.